LEO INOX

Heating capacity	10 - 45 kW
Air flow	900 - 4400 m³/h
Weight	18 - 24 kg
Color	-
Casing	stainless steel

	The LEO INOX heater has been developed to meet a high level of humidity, which is why it can be used in facilities such as: car washes, industrial workshops, food industry production halls, greenhouses etc.
	The stainless steel housing of the device ensures its durability against corrosive agents. To retain its anti-corrosion properties, it must be continuously kept clean.
	The heat exchanger is built of copper pipes with aluminium lamellas on them. At the customer’s request, it can be made of epoxy lamellas of enhanced resistance to corrosive factors.
	Selection - to choose the appropriate INOX steel grade of which the heater housing will be made, the parameters of the working environment must be determined appropriately: the type of substances causing corrosion, pH, humidity, etc

O	LEO INOX 25				LEO INOX 45				LEO INOX 65
	V = 4400 m³/h				V = 4100 m³/h				V = 3900m³/h
Tp1	PT	Qw	Δpw	Tp2	PT	Qw	Δpw	Tp2	PT	Qw	Δpw	Tp2
^oC	kW	I/h	kPa	^oC	kW	I/h	kPa	^oC	kW	I/h	kPa	^oC
	Tw1/Tw2 = 90/70
0	25,4	1121	11,7	16	46,8	2067	17,5	31,6	64,6	2660	36,8	46,1
5	23,5	1037	10,1	20	43,3	1911	15,2	34,7	60,2	2464	32,0	48,4
10	21,6	953	8,7	24,1	39,8	1758	13,0	37,8	55,4	2272	27,6	50,7
15	19,7	871	7,4	281	36,4	1607	11,0	40,9	50,1	2084	23,6	52,9
20	17,9	790	6,2	32,1	33,1	1459	9,2	43,9	46,2	1899	19,9	55,1
	Tw1/Tw2 = 80/60
0	21,6	950	8,9	13,6	40,1	1762	13,4	27,1	56,1	2288	28,7	39,8
5	19,7	867	7,5	17,6	36,6	1610	11,4	30,2	51,3	2097	24,5	42,1
10	17,9	785	6,3	21,6	33,2	1459	9,5	33,2	46,7	1909	20,7	44,3
15	16,0	704	5,1	25,6	29,9	1312	7,8	36,2	42,1	1725	17,2	46,5
20	14,2	624	4,1	29,6	26,5	1166	6,3	39,2	37,6	1543	14,1	48,6
	Tw1/Tw2 = 70/50
0	17,8	779	6,4	11,2	33,3	1459	9,8	22,5	47,1	1919	21,5	22,4
5	15,9	697	5,2	15,2	29,9	1309	8,1	25,6	42,5	1731	17,9	25,6
10	14,1	617	4,2	19,2	26,6	1162	6,5	28,6	37,9	1547	14,6	37,8
15	12,3	537	3,2	23,1	23,2	1017	5,1	31,5	33,4	1366	11,6	39,9
20	10,5	457	2,4	27,0	20,0	874	3,9	34,4	28,9	1187	9,1	42,0

V - air flow
PT - heating capacity
Tp1 - air temperature at the unit inlet
Tp2 - air temperature at the unit outlet

Tw1 -water temperature at the admission to the heat exchanger
Tw2 - water temperature at the recoil (return) loop of the heat exchanger
Qw - heating water flow stream
Δpw - water pressure drop in the exchanger

Products

Do you know that...

Mass [kg]	INOX 25	INOX 45	INOX 65
unit	18	19,4	21,3
unit filled with water	19	21,4	24
Air stream range [m]	INOX 25	INOX 45	INOX 65
L*	26	24	22