Products

Cube 20 and 40 with swirl diffuser


Basic parameters:

Cooling capacity: to 40 kW
Air flow: to 8000 m3/h
Fresh air
for Ecodesign:
to 8000 m3/h
Heat recovery efficiency
for Ecodesign:
73,1%
 
Heating capacity: 20-181 kW
Possible version: N, W, E, EHP, G
Mass: 815-1020 kg
 
   
 

   Short characteristic:

Cube 20-160 compact devices ensure complex air handling: cooling, heating and ventilation with heat recovery.  Cooling unit, rotary exchanger, heater and Siemens Climatix control system all in one casing! Additionally, the units are available with a roof base adaptor with an integrated swirl diffuser and actuator. Cooling unit, rotary exchanger, heater and Siemens Climatix control system all in one casing! Units are equipped with a highly efficient heat recovery system and EC fans, therefore they already meet all requirements in accordance
with the stringent 2018 Ecoproject norms.  Cube 20-40 can be equipped with water exchanger
with circulation pump and three-way valve, electric heater, reversible heat pump or gas heater.

Available versions::

Cube 20 - R W / NW
  1   2 3   4
1 Nominal cooling power 20-160 [kW]
2 Heat recovery R- rotary exchanger
3 versions available
 
N - without additional heater
W - with water exchanger
E - with electric exchanger
EHP - reversible heat pump and electric function
G - with gas exchanger
4 Roof base with roof adaptor and swirl diffuser.

 

Compact construction transport handles and self-supporting structure ensure easy lifting and installation, additionally 50mm mineral wool isolation minimizes heat losses and noise levels.

 

   Purpose:

Various options and various mounting possibilities together with high disposal pressure guarantee a wide range of application.  The Cube devices are perfect for shopping malls, logistic centers, industrial facilities, petrol stations or supermarkets.  The use of compressor with inverter makes them suitable for use in offices and facilities with many rooms.

 

   Control system:

As a standard, each Cube rooftop is equipped with Siemens Climatix with a room controller and a complete measurement/regulation/ as alarm system.

learn more

 

   Technology/innovation/benefits:

Cooling-The use of compressor with an inverter in tandem or multi-circuit configuration ensures desired cooling parameters.

Ec fans- electricity savings and step-less regulation of efficiency.

Rotary exchanger inside, no need to use an exterior module, effective heat recovery in a compact casing.

Metal base with roof adaptor and swirl diffuser enables direct mounting on the roof without the need of ducts.

Transport handles-enables fast installation and easy lifting without spacing beams 

Casing- 50 mm mineral wool isolation ensures silent operation and minimum heat loss.  
 

Mounting with swirl diffuser.

The roof base comes with a roof adaptor with an integrated swirl diffuser.  It ensures a direct supply and exhaust of air to and from the facility.  

Step 1
Preparation of the roof.

Krok 1 - Przygotowanie podkonstrukcji

Step 2
Mounting of the roof base with the integrated swirl diffuser.

Krok 2 - Posadowienie podstawy z nawiewnikiem oraz urządzenia

In the case of a facility with a non-standard, thicker roof construction it is possible to extend the dedicated roof adaptor.

Duct connection

Montaż Cube 20 and 40 with swirl diffuser

1
The ducts are connected from below. This applies to all Cube units.

 

Montaż Cube 20 and 40 with swirl diffuser

2
Used air duct connected from below. The supply duct is connected to the side of the unit. This applies to Cube 40-160 units.

Montaż Cube 20 and 40 with swirl diffuser

3
Ventilation ducts connected to the sides of the unit. This applies to Cube 40 unit.


Montaż Cube 20 and 40 with swirl diffuser

4
Mounting of unit next to a building. Possibility of duct connection from the side and from below.


Ductless Mounting.

Montaż Cube 20 and 40 with swirl diffuser

Textile duct mounting.

Montaż Cube 20 and 40 with swirl diffuser

Ductless connection on a base and roof adaptor and swirl diffuser. This applies Cube 20, and Cube 40 units.

Textile ducts dedicated to rooftop applications.  Selected individually to the requirements of the building. 

  • CAD

    (19.31 MB)

  • RFA

    (16.83 MB)

  • Certificates

    (978.38 kB)

  • Brochure total

    (11.96 MB)

  • Product brochure

    (4.36 MB)

You are using Internet Explorer version 9.0 or earlier. For proper viewing of our website we recommend the latest version of the browser, which you can downloadhere.
Facebook LinkedIn sticker YouTube designer zone